DynaColor S4 Guida di Installazione

00P6H8020ZXSEC6 Integrated High Speed Dome Camera Outdoor Installation Guide Version 3.6

Installation Guide 93. Camera Setups and Cable Connections Before installing or connecting the dome camera, please refer to this section and comple

Installation Guide 10 STEP 4 Attach the dome cover to the camera body. Before doing that, apply some lubricant on the cover’s water-proof rubber to

Installation Guide 11STEP 7 Set the switches located on the bottom of the dome body. Refer to section 3.2 Dome Camera Setups for detailed informatio

Installation Guide 12 3.2 Dome Camera Setups Before connecting the Dome Camera to other devices of CCTV system, please complete the Dome Camera’s I

Installation Guide 133.2.2 Communication Switch Setting Communication Switch SW 1 SW 2 RS-485 Setting SW 3 Termination SW 4 Line Lock SW 5 Fa

Installation Guide 14 3.2.3 ID Setting Please change the analog Dome Camera’s ID if there is more than one Dome Camera on the same installation site

Installation Guide 153.2.4 Camera Control Protocol Setting Define the protocol you are going to use basing on the devices of your surveillance syst

Installation Guide 16 3.3 Cables and Connections The Dome Camera is supplied with one integrated 22-pin Data Cable for connecting with the power, v

Installation Guide 17NOTE: Be careful not to pull the cables improperly during installation. Additionally, it is suggested to fasten the cables afte

Installation Guide 18 Analog Model The analog Dome Camera’s 22-pin connector definition is listed as below. Pin Definition Cable Pin Definitio

Installation Guide 1Preface Information given in this manual was current when published. The company reserves the right to revise and improve its pr

Installation Guide 193.3.4 RS-485 Connector Definition RS-485 is the interface that communicates the Dome Camera and its control device. Please con

Installation Guide 20 Insert the terminal into the pin holes on the connector housing, with the hook outward, as indicated in the figure. To unlock

Installation Guide 214. Dome Camera Installation Basing on user’s installation environments, the Dome Camera can be installed on ceiling, on wall or

Installation Guide 22 4.2 Optional Accessories Dome Camera Accessories Sunshield Height: 129.5 mm (5.05 inches); Diameter: 190 mm (7.48 inches); 0.1

Installation Guide 23Mounting Accessories Standard Pendent Mount White; 348×104×138.6 mm (13.7×4.1×5.5 inches); 1.5 kg (3.3 lbs); Diameter: 45 mm (1

Installation Guide 24 Swan Tube For mounting with Swan Tube. White; Iron, Dimension: 835 x 300 mm (32.9×11.8 inches); Diameter: 45 mm (1.8 inches);

Installation Guide 25 Pole Thin Direct Mounting 232(L)×136(W)×60(D) mm (9.1×5.4×2.4 inches); Diameter: 112~140 mm (4.4~5.5 inches); 0.7 kg (1.6 lbs)

Installation Guide 26 Corner Wide Box Mounting 232(L)×234(W)×210(D) mm (9.1×9.2×8.3 inches); 2.7 kg (6 lbs); Supplied with M8x16 screw x4, washer-8

Installation Guide 27Wall Box Mounting 270(L)×166(W)×95(D) (10.6×6.5×3.7 inches); 2.2 kg (4.84 lbs); Supplied with M8x16 screw x4, washer-8 x4 and s

Installation Guide 28 Other Application Accessories Repeater/Converter D77R1: RS-485/RS-232 Converter D77R2: RS-232 between RS-485/RS-442 D77R3: Bi-

Installation Guide 2 This symbol on the product or on its packaging indicates that this product shall not be treated as household waste in accorda

Installation Guide 294.3 Ceiling Mounting with Straight Tube The Straight Tube is available in different length: 25 cm and 30 cm. Package Contents

Installation Guide 30 6) Thread the cable(s) through the Outdoor Mount Kit and join the Outdoor Mount Kit to the Straight Tube with the supplied sc

Installation Guide 314.4 Wall Mount 4.4.1 Swan Tube Package Contents: • M8x12 Screw x1 • Spring Washer-8 x1 • Pendent Tube Washer x1 • Rubber Wa

Installation Guide 32 Wall Mount: Swan Tube + Indoor Mounting Kit 4.4.2 Compact Pendent Mount Package Contents: • Rubber Washer-8 x1 • Penda

Installation Guide 33Tools Needed: • Tool for drilling • Tool for screwing Follow the steps below to mount the Dome Camera with the Compact Pend

Installation Guide 34 6) Connect the cable(s) to the Dome Camera. 7) Join the Dome Camera to the Outdoor Mount Kit with the supplied M5 screw and

Installation Guide 35Tools Needed: • Tool for drilling • Tool for screwing Follow the steps below to mount the Dome Camera with the Standard Pend

Installation Guide 36 Wall Mounting: Standard Pendent Mount + Outdoor Mount Kit 4.4.4 Wall Box Mounting Package Contents: • M8x16 Screw x4

Installation Guide 37Follow the steps to mount the Dome Camera with the Standard/ Compact Pendent Mount and Wall Box Mounting. 1) Make a cable e

Installation Guide 38 4.5 Corner Mount 4.5.1 Corner Standard Mounting Plate/Corner Plate Mini Package Contents: • Washer-8 x4 • Spring Washer-8 ×

Installation Guide 3Warnings and Cautions • Handle the camera carefully Do not abuse the camera. Avoid striking, shaking, etc. The camera could be

Installation Guide 39NOTE: Please block the cable entry hole with the supplied sponge to avoid insects entering the Pendent Mount. See the illustrat

Installation Guide 40 4.5.2 Corner Thin/Wide Box Mounting Package Contents: • M8x16 Screw x4 • Washer-8 x4 • Spring Washer-8 x4 Items Needed:

Installation Guide 414) Attach the Waterproof Rubber to the Standard/ Compact Pendent Mount. 5) Thread the cable(s) through the Outdoor Mount Kit

Installation Guide 42 4.6 Pole Mount 4.6.1 Pole Thin/Wide Direct Mounting Package Contents: • Stainless Steel Straps x4 • M8x16 Screw x4 • W

Installation Guide 43NOTE: Please block the cable entry hole with the supplied sponge to avoid insects entering the Pendent Mount. See the illustrat

Installation Guide 44 4.6.2 Pole Thin/Wide Box Mounting Package Contents: • M8x16 Screw x4 • Washer-8 x4 • Spring Washer x4, • Stainless

Installation Guide 454) Attach the Waterproof Rubber to the Standard/ Compact Pendent Mount. 5) Thread the cable(s) through the Outdoor Mount Kit

Installation Guide 46 5. System Expansion 5.1 Connecting with Power Box A power box contains a 24V AC adapter, two terminal blocks (for communicati

Installation Guide 475.2 Data Formats Transforming To integrate other surveillance devices with the high speed dome cameras or to extend the distan

Installation Guide 48 5.3 Signal Distribution The RS-485 Signal Distribution Unit (SDU) is designed to relay control codes to speed dome cameras. It

Installation Guide 4 Table of Contents 1. Introduction...

Installation Guide 496. System Integration The dome camera is allowed to be integrated into other suppliers' surveillance systems with large se

Installation Guide 50 Cable Definition (D Protocol Keyboard to PTZ Camera) For SpeedDomeFor D Protocol KeyboardTx-Tx+GNDRx-Rx+123456Tx -Tx+GNDRx-Rx+

Installation Guide 51Appendix A: Technical Specification Items G Model M Model V Model P Model T Model CAMERA CCD Sensor 1/4" EXview 1/4&

Installation Guide 52 Items G Model M Model V Model P Model T Model Cruise 8 Privacy Mask 24 8 24 8 24 Proportional Pan & Tilt On / Off

Installation Guide 53 Items S3 Model S4 Model S5 Model S6 Model CAMERA CCD Sensor Sony CCD Optical Zoom 30× 36× Digital Zoom 1~12x variable NT

Installation Guide 54 Items S3 Model S4 Model S5 Model S6 Model Auto Flip Mechanical / Digital / Off Digital Slow Shutter On / Off Motion Dete

Installation Guide 55.3 Signal Distribution ...

Installation Guide 6 1. Introduction With weather resistant feature, the Integrated High Speed Dome Camera is applicable to outdoor installation. Th

Installation Guide 72. Standard Package Contents Before proceeding, please check the box contains the items listed here. If any item is missing or

Installation Guide 8 Network Model Dome Camera with Outdoor Mount Kit Data Cable for Power Supply, Video, Audio and Alarm (AC 24V) Lubricant